Watch our video!
Solving rigid-body motion problems involves both “kinematics” and “kinetics.” Kinematics is the study of the geometry of motion, whereas Kinetics involves the relationship between the forces and the geometry of motion, essentially Newton’s 2nd Law. The most common mistake is consecrating on the kinematics of the problem before applying Newton’s 2nd Law. Usually you will end up with only one unknown more than the number of equations. Therefore, you only need to determine only one kinematic equation, and it is usually obvious which kinematic equation is needed.
For example, considering the simple hoist, you will obtain 4 unknowns from the 3 equations of Newton’s 2nd Law applied to the pulley, and 1 equation in 1 unknown from the block. So you need another equation and that will come from the kinematic relationship that the tangential acceleration of the pulley must equal the linear acceleration of the block. If you try to do the kinematics first, there are lots of possibilities and it is very easy to get lost in the process.
So, do kinetics first, Newton’s 2nd Law, then do kinematics. – Dr. Tom
Mechanical PE Exam Prep That Works
Pay Up Front and Save $100!
Test Drive Your Course for Only $50!
Pay-As-You-Go and Start for Only $50!
Don’t miss out on the latest posts (and more)! Follow DTC on: