Watch our video!
The application of relative motion equations, especially those involving velocity, are some of the most powerful in dynamics. It may not involve finding magnitudes of forces in members, however, the motion of a member can be the key to solving for forces in those members.
The key to relative motion equations is that they are “vector” equations. Most problems will be 2D problems, so the math is not too difficult. However, not starting with vectors is the most common mistake. For the example presented, one seen many times in NCEES Practice Exams, the ends of the member are constrained to move in particular directions. For this example, one end can only move horizontally, and one end can only move vertically. Yes, the directions could be at some angle, however, that would make the problem considerably more difficult.
You are also given the velocities of the ends. So, in separating the relative motion equation into a two scalar equations, the angular velocity of the rod and its direction can be found. One of the major keys to applying the relative motion equations is knowing that two terms are absolute and one term is relative. And the relative velocity is the velocity of one end as if the other end is fixed, but it is not fixed. And the point is moving in a circle, where the radius of the circle is the distance between the two ends.
This is a favorite type of problem with the NCEES, so mastering its solution is worth the effort. – Dr. Tom
Mechanical PE Exam Prep That Works
Pay Up Front and Save $100!
Test Drive Your Course for Only $50!
Pay-As-You-Go and Start for Only $50!
Don’t miss out on the latest posts (and more)! Follow DTC on: